Arduino

Product Details:

Arduino UNO R3 (Original)

• Buy the Arduino UNO R3 at best prices in Bangalore and Hyderabad
• Arduino Uno is a microcontroller board based on the ATmega328P  It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. 
• It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
• You can tinker with your UNO without worring too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.

arduino uno r3 original arduino uno r3 originalplaca arduino uno r3 originalharga arduino uno r3 originaluno r3 for arduino atmega328p  atmega16u2 with usb. original arduino uno r3how to identify original arduino uno r3

Product Details:

Arduino Mega Original

• This is the Original Arduino Mega board from Arduino
• Official Arduino Board with 3-Month brand Warranty
• ATmega16U2 instead 8U2 as USB to serial converter
• Stronger RESET circuit
• 5V operating voltage
• 40mA DC current per I/O pin
• 256KB flash memory of which 8KB used by bootloader
• 8KB SRAM
• 4KB EEPROM
• Buy Arduino Mega board at best prices in Bangalore and Hyderabad.

Product Description

This is Original Arduino Mega board from Arduino Officials based on ATmega16U2.  The Official Arduino Mega 2560 is Rev3 development board based on ATmega2560 microcontroller. The Mega board has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analogue inputs, 4 UARTs (hardware serial ports), a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

Applications of Arduino Mega Original

• Embedded Design & Development
• Industrial, Communications & Networking
• Sensing & Instrumentation
• Automation & Process Control

Product Details:

Arduino MKR WIFI 1010 (Bangalore and Hyderabad)

• Robocraze is the authorized seller of Arduino in India. Therefore, even if you are Bangalore, Hyderabad, Mumbai or Pune, you can order and buy Arduino MKR Wifi board online from the comfort of your homes.
• The arduino board's main processor is a low power Arm® Cortex®-M0 32-bit SAMD21, like in the other boards within the Arduino MKR family.
• The WiFi and Bluetooth® connectivity is performed with a module from u-blox, the NINA-W10, a low power chipset operating in the 2.4GHz range.

Product Details:

Arduino Nano Original Microcontroller 

• This is the Arduino Nano Original manufactured by Arduino.
• Buy Arduino Nano microcontroller at bulk prices in Bangalore and Hyderabad.
• Operating Voltage (logic level): 5V
• 8 analog inputs ports: A0 ~ A7
• 14 Digital input / output ports: TX, RX, D2 ~ D13
• 1 pair of TTL level serial transceiver ports RX / TX
• Using Atmel Atmega328P-AU MCU
• There is a bootloader installed in it
• Standard 0.1” spacing DIP (breadboard friendly).
• Manual reset switch.
• In case of bulk purchases, you can buy the product at wholesale prices.

Product Description

This Arduino Nano is Original Arduino Nano Board. It is a breadboard-friendly board based on the ATmega328P from Arduino officials made in Italy. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.

Product Details:

Arduino NANO Version 3 is the open source smallest Embedded Development board launched by Arduino based on Atmega328 SMD Package Microcontroller.
It is a Surface mount Breadboard Friendly board integrated with Mini USB Port.
DC Power Jack is not available on this Board, so power can be given through Mini USB Cable.
It automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.

Product Details:

The Uno R3 with Cable is a micro-controller board base on the ATmega328 . It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.

It contains everything need to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

“Uno” means one in Italian and is the name to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards and the reference model for the Arduino platform; for a comparison with previous versions, see the index of Arduino boards.

arduino uno board Buy Online arduino uno board R3 Atmega 328 arduino uno with USB Cable Arduino Cable  Arduino Micro Controller new atmega328parduino uno rev.3 microcontroller board

Product Details:

arduino pro mini atmega328parduino pro mini atmega328p datasheetarduino pro mini atmega328 datasheetarduino pro mini atmega328arduino pro mini atmega328 pinoutarduino pro mini atmega168 pinoutarduino pro mini atmega32u4arduino pro mini atmega328p pinoutarduino pro mini atmega168arduino pro mini atmega328p 5v 16mhzarduino pro mini 5v atmega328arduino pro mini atmel studioarduino pro mini atmel icearduino pro mini atmelarduino mega 2560 pro mini ch340g 5v atmega2560-16auarduino pro mini board atmega328arduino pro mini new atmega328 5v 14 pinarduino pro mini atmega328 projectsarduino pro mini avr programmerarduino pro mini atmega328 pdfarduino pro mini deek-robot atmega328

Product Details:

• The Arduino Mega 2560 R3 from Robocraze is an open source precise microcontroller board Successor to the Arduino Mega based on the ATmega2560 SMD chip.
• The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. 
• The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.

This Board has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB Cable connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller. Using the board is also very easy, simply connect it to a computer with a USB cable or power it with DC adapter or battery to get started. 

Product Details:

Ardunio Mega Microcontroller Boards in Bangalore & Hyderabad

• Arduino Mega 2560 is a Microcontroller board based on Atmega2560. 
• The Arduino Mega Microcontroller board is available in Bangalore and Hyderabad at great prices on Robocraze.
• It comes with more memory space and I/O pins as compared to other boards available in the market.
• There are 54 digital I/O pins and 16 analog pins incorporated on the board that make this device unique and stand out from others.
• ICSP header is a remarkable addition to Arduino Mega which is used for programming the Arduino and uploading the code from the computer.
• This board comes with two voltage regulator i.e. 5V and 3.3V which provides the flexibility to regulate the voltage as per requirements as compared to Arduino Pro Mini which comes with only one voltage regulator. 
• There is no much difference between Arduino Uno and Arduino Mega except later comes with more memory space, bigger size and more I/O pins. 

Product Details:

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.


mega 2560 promega 2560 icmega 2560 pro minimega 2560 mega 2560 breakout boardmega 2560 spi pinsmega 2560 interrupt pinsmega 2560 r3mega 2560 arduinomega 2560 arduino pinoutmega 2560 adcmega 2560 amazonmega 2560 arduino datasheetmega 2560 avrdude stk500v2_receivemessage() timeoutmega 2560 analog inputmega 2560 atmelmega 2560 avrthe mega 2560 pro embedmega 2560 boardmega 2560 bootloadermega 2560 bluetoothmega 2560 board layoutmega 2560 board pinoutmega 2560 bootloader problemmega 2560 baud ratemega 2560

Product Details:

Arduino Uno R3 Microcontroller in Bangalore and Hyderabad

• The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328. 
• Robocraze will provide you with Arduino UNO microcontroller board in Bangalore and Hyderabad.
• It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. 
• It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
• For best prices on Arduino UNO board, visit 

uno r3 smd editionarduino uno r3 smdarduino uno r3 smd arduino uno r3 smd schematicarduino uno r3 smd editionarduino uno r3 smd pinoutarduino uno r3 smd vs diparduino uno r3 smd boardarduino uno r3 (smd version)arduino uno r3 smd edarduino uno smd r3 bootloaderarduino uno r3 ch340 smd chip driverarduino uno rev3 r3 atmega328 smd com cabo usbperbedaan arduino uno r3 smd dan diparduino uno r3 smd atmega328arduino uno r3 smd pdfarduino uno r3 vs r3 smdarduino uno smd r3 schaltplanunterschied arduino uno r3 smddiferencia entre arduino uno r3 y smd

Product Details:

Arduini Pro Mini Atmega 328p - Bangalore & Hyderabad

• Buy Arduino Pro Mini microcontroller board at bulk prices in Bangalore and Hyderabad.
• The Arduino Mini 05 is a small microcontroller board originally based on the ATmega168, but now supplied with the 328.(datasheet), intended for use on breadboards and when space is at a premium. 
• It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, and a 16 MHz crystal oscillator. 
• It can be programmed with the USB Serial adapter or other USB or RS232 to TTL serial adapter.

 

The new Mini (revision 05) has a new package for the ATmega328P, which enables all components to be on the top of the board. It also has an onboard reset button. The new version has the same pin configuration as revision 04.

Features:

 

• New mini atmega328 replace aTmega128 for Arduino-compatible nano module
• Package Included: 1 x Arduino pro min atmega328p board, 3 x gilded pin
• Analog Pins: 8 Digital I or Os: 14
• Supports auto-reset

Product Details:

Arduino Nano BLE Sense with Headers

• The Arduino Nano BLE Sense features a powerful nRF52840 microcontroller and operates at 3.3V.
• For bulk purchases of Arduino BLE Sense, kindly visit the Robocraze website.= and purchase them at best prices in India. 
•  Robocraze is the authorized seller of Arduino in India. Therefore, even if you are in Bangalore, Hyderabad, Mumbai or Pune, you can order and buy Arduino Nano BLE Sense board online from the comfort of your homes.
• It is integrated with 9 axis inertial sensor, humidity, temperature sensor, barometric sensor, microphone, gesture, proximity, light colour and light intensity sensor.
• The Arduino Nano 33 BLE Sense is a completely new board and comes in the smallest form factor.
• This board is built with 14 digital I/O pins and has a flash memory of 1Mb and 256Kb SRAM.
• Robocraze is the authorized seller of Arduino products in India and you can buy Arduino Nano BLE Sense board at best prices from Robocraze.

Product Details:

Arduino MKR IoT Bundle (Bangalore, Hyderabad)

• Robocraze is the authorized seller of Arduino in India. Therefore, even if you are Bangalore, Hyderabad, Mumbai or Pune, you can order and buy Arduino MKR IoT Kit online from the comfort of your homes.

• The Arduino MKR IoT Bundle walks you through the basics of using the Arduino MKR1000 for IoT applications. You'll learn through building 5 creative experiments thanks to the step by step online tutorials available on the Arduino Project Hub platform. The Arduino MKR IoT bundle includes a selection of the most common and useful electronic components to build 5 IoT experiments.

Product Details:

Arduino Micro Controller Board

• The Arduino Micro board is built with a ATmega32U4 microcontroller.
• This Arduino Micro features 20 digital input/output pin and a 16 MHz crystal oscillator.
• Robocraze is the authorized seller of Arduino in India. Therefore, even if you are Bangalore, Hyderabad, Mumbai or Pune, you can order and buy Arduino Micro online from the comfort of your homes.

Product Details:

Arduino Nano Every with Headers

• The arduino Nano Every is an improved version of the arduino nano.
• The Nano Every is integrated with a powerful ATMega4809 microcontroller.
• This arduino is 5V compatible board in the smallest available form factor.
• Robocraze is the authorized seller of Arduino in India. Therefore, even if you are Bangalore, Hyderabad, Mumbai or Pune, you can order and buy Arduino Nano Every online from the comfort of your homes.

Product Details:

Arduino Leonardo Board

• The Arduino Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor.
• This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.
• Robocraze is the authorized seller of Arduino in India. Therefore, even if you are Bangalore, Hyderabad, Mumbai or Pune, you can order and buy Arduino Leonardo board online from the comfort of your homes.

Product Details:

Arduino Uno Original

• This is the Arduino UNO original manufactured by Arduino Official
• Micro-controller : ATmega328P.
• Operating Voltage: 5V.
• Input Voltage (recommended) : 7-12V.
• Digital I/O Pins: 14 (of which 6 provide PWM output).
• Analog Input Pins: 6.
• In case of bulk purchases, you can buy the product at wholesale prices.

   

Product Description

The Arduino Uno is a microcontroller board based on the ATmega328 AVR microcontroller.It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. 

Product Details:

The Robocraze Leonardo R3 Board Micro-USB compatible with Arduino is a micro-controller board base on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs);  a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button.

It contains everything need to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

The Leonardo R3 Board differs from all preceding boards in that the ATmega32u4 has built-in USB communication; eliminating the need for a secondary processor.

This allows the Leonardo to appear to a connected computer as a mouse and keyboard; in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board.

leonardo development boardleonardo r3 development boardarduino leonardo development board

Product Details:

Arduino Due Original

• This is Arduino Due Original manufactured by Arduino Officials.
• A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
• CPU clock at 84Mhz
• 96KBytes of SRAM
• 512KBytes of flash memory for code
• A DMA controller, that can relieve the CPU from doing memory intensive tasks.
• In case of bulk purchases, you can buy the product at wholesale prices.

Product Description

The Arduino Due is a microcontroller board based Original Arduino Due Board on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.

Product Details:

The Arduino Ethernet Shield V1 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. This means you can learn exactly how it's made and use its design as the starting point for your own circuits. Hundreds of thousands of Arduino boards are already fueling people’s creativity all over the world, everyday. Join us now, Arduino is you!

• Requires an Arduino board (not included)
• Operating voltage 5V (supplied from the Arduino Board)
• Ethernet Controller: W5100 with internal 16K buffer
• Connection speed: 10/100Mb
• Connection with Arduino on SPI port

ethernet shield w5100, arduino ethernet shield w5100, w5100 ethernet shield schematic, arduino uno ethernet shield w5100, arduino nano ethernet shield w5100, arduino mega ethernet shield w5100, Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino, ETHERNET SHIELD W5100 FOR ARDUINO, Ethernet Nano W5100 Ethernet Shield LAN Network Module Micro-SD Support TCP UDP For Arduino, Arduino Ethernet W5100 R3 Shield, Ethernet W5100 Shield Network Expansion Board W/ Micro Sd Card Slot for Arduino, Mini W5100 Ethernet Network Module Board For Arduino

Product Details:

The Arduino Uno is a microcontroller board based on the ATmega328 ."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. It has 14 digital input or output pins , 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller, simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2Atmega8U2 up to version R2) programmed as a USB-to-serial converter. This is your first step towards interfacing the LCD and keypad with your Arduino.



arduino uno kit pricearduino uno kit amazonarduino uno kit price in indiaarduino uno kit for robotic projectsarduino uno kit for beginnersarduino uno kit buy onlinearduino uno kit componentsarduino uno kit flipkartarduino uno kit projectsarduino uno kit australiaarduino uno kit atmega328parduino uno kit aliexpressarduino uno kit descriptionarduino uno kit driverarduino uno kit discountarduino uno kit de démarragearduino uno drum kitarduino uno development kitarduino uno drone kitarduino uno diy kitarduino uno drum kit sketcharduino uno education kitarduino uno experimenter''s kitarduino uno engineering kitarduino uno starter kit ebayarduino uno starter kit elegooarduino uno starter kit ebay ukarduino uno r3 starter kit ebayelegoo arduino uno kitarduino elegoo uno r3 kitarduino uno full kitarduino uno r3 starter kit for salestarter kit for arduino uno r3roinco arduino uno multipurpose starter kit for beginnersuno starter kit for arduino projectsarduino uno grove kitarduino uno starter kit guide pdfarduino uno starter kit guidearduino uno r3 genuine kitarduino genuino uno kitgeneric arduino uno kitharga arduino uno kitharga arduino uno starter kitarduino uno kit informationarduino uno kit

Product Details:

Robocraze Arduino Uno R3 with USB Cable and PIR sensor Combo

Arduino UNO - R3 with USB Cable includes both Arduino Uno board and compatible USB Cable. Arduino UNO - R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable & start innovating.

A passive infrared sensor (PIR sensor) is an electronic sensor that measures infrared (IR) light radiating from objects in its field of view. They are most often used in PIR-based motion detectors.

Product Details:

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega 2560 board is compatible with most shields designed for the Uno and the former boards Duemilanove or Diecimila.



arduino mega original vs clonearduino mega original pricearduino mega original india arduino mega original price in indiaarduino mega original boardarduino mega original

Product Details:

The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. 

The Arduino Due is the first Arduino board based on a 32-bit ARM core microcontroller. With 54 digital input/output pins, 12 analog inputs, it is the perfect board for powerful larger scale Arduino projects.




arduino due buy india arduino due bootloaderarduino due baud ratearduino due board managerarduino due bluetootharduino due built in ledarduino due breakout boardarduino due blink

Product Details:

Witty Fox - ESP32 Storm Board 

On-board 1000 mAh Li-ion Battery with Inbuilt protection and charge-discharge module. Selectable power switch

[Advanced Technology]: Storm board enables users to wirelessly program the board (OTA) directly.

Multiple power supply options (micro USB, DC Jack, Battery, Headers)
200mA LDO 3.3v regulator for a wide operating voltage range.

On-board Controllable LED & push button connected to GPIO.

In case of bulk purchases, you can buy the product at wholesale prices.

Product Description

• The WittyFox ESP32 Storm board is an easy to use prototyping board developed specially keeping IoT Applications in mind. It allows users to upload their program wirelessly (OTA) by default or connect to the laptop using Witty Fox ESP Programmer. With mostly all usable GPIO breakouts of ESP32 neatly organized with power pins to aid the user in quick prototyping. It also has multiple breakouts for both SPI and I2C interfaces, as well as a dedicated breakout for PIR sensor.

Product Details:

This is a Motor Driver Shields for Arduino Boards that can control upto four DC geared motors or two unipolar or bipolar stepper motor. It also has connections for two 5 volts Servo Motors. The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers. The output enable of the L293D is directly connected to PWM outputs of the Arduino.To increase the maximum current, the L293D allows extra chips with "piggyback". Piggyback is soldering one or two or three extra L293D drivers on top of the L293D drivers on the board to increase the maximum current. The L293D allows parallel operation.Features of Motor Driver Shield

• Supplied Fully Assembled

• 2x 5V Servo outputs connected to the high-resolution dedicated timer - no jitter!

• Can drive 4 DC motors or 2 stepper motors or 2 Servo's

• Up to 4 bi-directional DC motors with individual 8-bit speed selection

• Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.

• 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC

• Pull down resistors keep motors disabled during power-up

• reset button

• Tested compatible for Arduino Mega, Diecimila, Duemilanove, Arduino UNO

l293d motor driverl293d motor driver circuitl293d datasheetl293d icl293d motor driver boardl293d motor driver modulel293d motor driver icl293d pin diagraml293d arduinol293d arduino codel293d amazonl293d arduino shieldl293d alternativel293d applicationsl293d adafruitl293d arduino nanol293d application circuitl293d arduino connection

Product Details:

Robocraze OLED (Organic Light-Emitting Diode) is a self-light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.

Features :

1. No need of the backlight
2. The display is self-illuminating
3. Power requirement is low
4. They are offering the large viewing angle
5. Full Compatible with Arduino
6. The ultra-low power consumption of around 0.08w at full screen lit.

Robocraze OLED OLED Buy online OLED for Arduino OLED for raspberry pi OLED device OLED backlight OLED price 

Product Details:

Arduino Tiny Machine Learning Kit

The Arduino tiny machine learning kit is a part of the exciting TinyML Application and Deploying TinyML on Microcontrollers courses that are part of the Tiny Machine Learning (TinyML) specialization from EdX will equip you with all the tools you need to bring your ML visions to life.

You will be able to explore practical machine learning use cases using classical algorithms as well as deep neural networks powered by TensorFlow Lite Micro. The possibilities are limited only by your imagination.

Robocraze is the authorized seller of Arduino in India. Therefore, even if you are in Bangalore, Hyderabad, Mumbai or Pune, you can order and buy Arduino tiny ML kit online from the comfort of your home.

Product Details:

The TFT01 LCD module is work in 3.3V voltage level and it's not compatible with Arduino MEGA pins

This LCD TFT01 Arduino Mega shield V2.0 is fit for 3.2 inch, 3.2W inch, 4.3 inch, 5 inch, 7 inch TFT LCD Module

The TFT01 MEGA shield V2.0 supports both 16-bit modes. Because of Mega board have enough pins for using SD card and Touch function at the same time

arduino mega shield eaglearduino mega shield eagle libraryarduino mega shield schematicarduino mega shield pcbarduino mega shield screwarduino mega shield 

Product Details:

The Robocraze Sensor Shield  Expansion Board For Arduino is produced by ALSRobot. This Sensor Shield expansion board to retains the advantages of version V4.0 on the basis of stack design, PCB Immersion Gold processing technology. newly added many kinds of interface, for example, IIC interface, 32 channels servo motor interface, Bluetooth communication module interface, SD Card communication module interface and so on, more convenient.

Sensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers and many more directly to your Arduino through this Sensor Shield.

Features:

• The Arduino I/O Expansion Shield provides an easy way to connect sensors, servos and RS485 device to Arduino board. It expands Arduino''s Digital I/O and Analog Input Pins with Power and GND
• It also provides separate PWM Pins which are compatible with standard servo connector
• PIN13 LED Pilot Digital IO Ports D0-D13 Analog IO Ports A0-A5 Reset Button Power In
• Power LED SD Card Interface Ultrasonic Interface(TTL)
• Bluetooth Interface APC220 Interface IIC Interface 12864 LCD Parallel Interface

Product Details:

This is LCD 1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast white text upon a blue background/backlight.

This is great blue backlight LCD display. It is fantastic for Arduino based project. This LCD1602 LCD Display is very easy to interface with Arduino or Other Microcontrollers.

This display overcomes the drawback of LCD 1602 Parallel LCD Display in which you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily in this product, an I2C adapter is directly soldered right onto the pins of the display. So all you need to connect are the I2C pins, which shows a good library and little of coding.

The I2C is a type of serial bus developed by Philips, which uses two bidirectional lines, called SDA (Serial Data Line) and SCL (Serial Clock Line). Both must be connected via pulled-up resistors. The usage voltages are standard as 5V and 3.3V.

If you already have the I2C adapter soldered onto the board like in this product, the wiring is quite easy. You should usually have only four pins to hook up. VCC and GND of course. The LCD display works with 5 Volts. So we go for the 5V Pin.

The values shown on the display can be either a simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

 

Specifications & Features :-

 

• Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
• I2C adapter allows flexibility in connections
• I2C Reduces the overall wirings.
• 16 characters wide, 2 rows
• White text on the Blue background
• Single LED backlight included can be dimmed easily with a resistor or PWM.
• Interface: I2C
• Interface Address: 0x27
• Character Color: White
• Backlight: Blue
• Supply voltage: 5V

alphanumeric lcd displayalphanumeric lcd display (16x2)alphanumeric lcd display 20x4alphanumeric lcd display  Buy Online

Additional Information:

• Delivery Time: 3-7 business days

Product Details:

IOTIF Training and Prototype board was designed to bridge the gap between theoretical knowledge and practical implementation by simplifying the process and eliminating hassles of the hardware connection. The Trainer kit was designed by keeping in mind the current industry trends and standards and gives the user the best of both worlds, embedded system and IoT. IOTIF trainer kit would set up the perfect stage for the graduating engineers.

On Board Components:

• Raspberry pi 3.
• SD card
• Arduino Nano
• PIR
• HCSR04
• DHT11
• Joystick Module
• ESP 8266
• Bluetooth Module
• Membrane keypad
• Relay
• Breadboard
• Buzzer
• LED
• RGB LED
• 16X2 LCD
• Stepper Motor
• Servo Motor

Kit Contains:

• IOTIF Board.
• 4 pin RMC connectors.
• 8 pin RMC connectors.
• Ethernet Cable.
• 5V, 3amp power adapter.
• Lab Manual.
• Casing

Additional Information:

• Item Code: RC-IM-02
• Pay Mode Terms: Other
• Port of Dispatch: Courier
• Packaging Details: 1. IOTIF Board 2. 4 Pin RMC Connectors 3. 8 Pin RMC Connectors 4. Ethernet Cable 5. 5v 3A Power Adapter 6. Lab Manual 7. Casing

Product Details:

Arduino Nano 33 IOT Headers

• The Arduino Nano 33 IoT is based on the SAMD21 microcontroller.
• Buy Arduino Nano 33 IOT headers at best prices in Bangalore and Hyderabad.
• The WiFi and Bluetooth® connectivity is performed with a module from u-blox, the NINA-W10, a low power chipset operating in the 2.4GHz range. 
• 
  
• The Arduino Nano has an operating voltage of 3.3V.
• 
  
• It is integrated with 14 digital input output pins, 11 PWM pins, a UART, a SPI and an I2C interface.
• 
  
• Buy Arduino Nano IoT headers online at best prices in India.
• 
  
• In case of bulk purchases, you can buy the product at wholesale prices.

Product Description

The Arduino Nano 33 IoT is the easiest and cheapest point of entry to enhance existing devices (and creating new ones) to be part of the IoT and designing pico-network applications. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the Nano 33 IoT is your one-stop-solution for many of the basic IoT application scenarios.

Product Details:

Arduino Nano Microcontroller in Bangalore and Hyderabad

• The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0).
•  It has more or less the same functionality of the Arduino Duemilanove, but in a different package.
• It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. 
• Arduino Nano microcontroller board is available in Bangalore and Hyderabad regions and can supply with best prices for bulk purchases.

Features:

•  Kit Contains: Soldered Nano compatible, Nano Cable Mini USB to USB ( cable colour might change from the one shown in picture)
• Note: Need to install CH341SER driver
• Microcontroller Atmel ATmega328 Operating Voltage (logic level): 5V Input Voltage (recommended): 7V ~ 12V Input Voltage (limits): 6V ~ 20 V
• Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin: 40mA
• Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader) SRAM: 2KB (ATmega328) EEPROM: 1KB (ATmega328) Clock Speed: 16MHz

Product Details:

Features:

• Arduino starter kit
• Can be used with a little experince in electronics
• The arduino is a microcontroller that allows you to access sensors and control things with just a little programming
• Package contains: Uno board, breadboard, led, jumper wires, usb cable, resistors
• Power source: Dc