Quadcopter & Accessories

Product Details:

This Robocraze OpenPilot CC3D EVO Flight Controller Straight Pin card has a smooth feature that makes it directly compatible with satellite receivers without the need for any additional cables. It also supports S.BUS. Evo is equipped with a powerful 32-bit STM32 processor with 128kb Flash and 20kb RAM. The 3-axis MEMs technology is used for both gyro and accelerometer.

The OpenPilot CC3D EVO Flight Controller Straight Pin card is easy to use with your computer. With USB and OpenPilot software, the card can be programmed in Windows, Mac, or Linux without the need for any drivers to install. OpenPilot is a very user-friendly program designed to be used by anyone, regardless of programming experience.

The OpenPilot CC3D EVO Flight Controller Straight Pin and OpenPilot CC3D EVO Flight Controller side Pin boards may not have any technical difference. There is the only difference between connector pins.(one has a Straight pin and other have 90º side pin.)

Open Pilot  cc3d flight controllercc3d firmwarecc3d softwarecc3d  flight controller gpscc3d flight controller  dronecc3d flight controller setupcc3d atom minicc3d atom wiringcc3d ardupilotcc3d atom pinoutcc3d atom wiring diagramcc3d autopilotcc3d atom mini firmwarecc3d

Additional Information:

• Item Code: TIFQC0031

Product Details:

Robocraze Diy Line Follower Kit with Manual

• Pre assembled and pre programmed Line follower kit
• Follows black line on white background (can be modified to do vice versa)
• Ideal for students' projects and competitions
• Just switch it on and you are ready to go

diy line follower robotdiy line follower sensordiy line follower arduinodiy line follower cardiy cny70 line followerhow to make a diy arduino line follower car at home

Product Details:

Extremely Powerful RC Brushless motor in small size. Specialized for multi-rotors. Includes prop adaptor to suite variety of props, supports pusher or puller props(Counter rotating props) . To be used directly with propellers. Comes with motor mount and Bullet male connectors.

Features

• Weight 52 gm
• Runs on 2-3 Cell Li-Po battery
• ESC Requirement minimum 25A
• Length 43.5mm with shaft
• Diameter 28.5mm
• Shaft Diameter 3.17mm
• 980 RPM/V no load speed
• Free Load Current 2.5A
• Maximum Efficiency : 80%
• Thrust with 1047 Prop at 12V: 880gm
• Included : Propeller Adaptor, Motor Mount, Mounting Screws

bldc motors workingbldc motors indiabldc motors pricebldc motors for dronesbldc motors pdfbldc motorsbldc for Quadcopter Drone parts propeller parts Buy online

Additional Information:

• Item Code: RC-IM015
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

MPU-6050 Accelerometer Module

• Features three-axis gyroscope and three-axis accelerometer.
• Communication modes: Standard IIC communications protocol.
• Chip built-in 16bit AD converter with16-bit data output.
• Gyroscope range: 250 500 1000 2000°/s.

TowerPro Mg996R High Torque Metal Gear Servo

• Metallic gears, standard size, high torque
• Suitable for arduino, raspberry pi and node mcu.
• Original tower pro 996r.
• Stall torque: 9.4 kgfã‚â·cm (4.8 v ), 11 kgfã‚â·cm (6 v)
• Operating speed: 0.17 s/60ã‚⺠(4.8 v), 0.14 s/60ã‚⺠(6 v)

Product Details:

• Newest 6 channel 2.4GHz system.
• The large backlite LCD screen with large fonts.
• A super active and passive anti-jamming capability

This is the FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver. This is a great entry-level radio for those just starting in the field of drones flying due to the ease of use of this product and an impressive list of features for a first-time radio. FlySky FS-i6 2.4G 6CH PPM RC Transmitter is a 6-channel telemetry 2.4GHz transmitter that uses the reliable Automatic Hopping Digital System (AFHDS) and includes such features as digital trims, backlit LCD screen, and simple programming. On top of this, you get a slim, modern radio transmitter that fits nicely in your hands and weighs just under 400g and so won’t test your arm stamina on those long flights. This radio is also really practical with a 3-position switch as well as two adjustable knobs for flight modes/ multiple flap positions. You also get the new FS-iA6B receiver with this kit. This is a compact 6-channel receiver with a range exceeding 500m and it comes with a dual antenna for excellent reception and interference rejection capabilities.  Each transmitter has a unique ID and so when binding, the receiver remembers this ID and accepts data from that transmitter only. This avoids picking up other transmitter signals and dramatically decreases inference and increases safety.


Features:

• Entry-level 6 channel 2.4GHz radio with telemetry capability.
• Dual Rate/Trims/Gear/Flap/Gyro Gain Adjust/Flight Mode/Throttle Hold/Hover Pitch Switches.
• Easy to use Programming & Navigation Buttons.
• Supports Heli/Standard Wing/Elevon/V-Tail.
• 20 Model Memory.
• 8 Character Model Name.
• Trainer and charging ports.
• The backlit LCD screen displays real-time transmitter and receiver voltage.
• 4 Stick Mode Selectable.
• Mode 2.
• It comes with a receiver.

 

Additional Information:

• Delivery Time: 3-7 business days

Product Details:

CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is the popular 6 Channel Radio CT6B manufactured by FlySky. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is an entry level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver with 6 channels. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER radio is a value for money, entry level 6 channel transmitter, ideal for quad copters and multicopters that require 6CH operation.

This radio has two retract switches and proportional flap dials in easy reach for channels 5 and 6. It can be powered by 8 x AA Size Batteries or a 12V Power Supply. It comes with a trainer port to help beginners learn flying.It can be configured by connecting it to the computer. Use the T6config software to configure your radio on a computer.

Additional Information:

• Item Code: TIFQC0032

Product Details:

This is a pack of 10x4.5 Electric Propellers from GWS.
This shape is constructed for gearbox applications.
Black plastic construction
Propeller size given on face of the propeller
Accepts a 5.5mm hex nut on the front or rear of the propeller
INCLUDES: A propellers
REQUIRES: A GWS gearbox to install propeller on
SPECS:
Length: 10 (254mm)
Pitch:4.5
Center hole diameter: 1/8 (3mm)

Package Size: 285*72*11mm



Propeller Black for DJI  Propeller Black for Drone s  Propeller Black for Quadcopter buy online

Additional Information:

• Item Code: TIFQC0004
• Delivery Time: 3-7 business days

Product Details:

Robocraze LARK DIY 2.4G 6-Axis Gyro 3D Flip Altitude Hold RC Quadcopter Drone Feature: Fine workmanship, and attractive appearance Totally DIY, interesting task to develop children’s manipulative ability LED light enables you to fly in the dark at night 2.4Ghz technology adopted for anti-interference 3D-flip function makes your flight exciting and fun Newest 6-Axis Gyro control system ensures stable flight and easy operation Built-in barometer with altitude hold function provides stable flight LARK DIY 2.4G 6-Axis Gyro 3D Flip Altitude Hold RC Quadcopter DroneLARK DIY 2.4G 6-Axis Gyro 3D Flip Altitude Hold RC Quadcopter Drone is Fine workmanship, and attractive appearance Totally DIY, interesting task to develop children’s manipulative ability LED light enables you to fly in the dark at night 2.4Ghz technology adopted for anti-interference 3D-flip function makes your flight exciting and fun Newest 6-Axis Gyro control system ensures stable flight and easy operation Built-in barometer with altitude hold function provides stable flight LARK DIY 2.4G 6-Axis Gyro 3D Flip Altitude Hold RC Quadcopter Drone




lark diy drone australialark diy drone kitdiy lark drone Buy online

Product Details:

The Robocraze KK2.1.5 Multi-Rotor controller is a flight control board for multi-rotor aircraft (Tricopters, Quadcopters, Hexcopters etc). Its purpose is to stabilize the aircraft during flight. To do this it takes the signal from the 6050MPU gyro/acc (roll, pitch and yaw) then passes the signal to the Atmega644PA IC. The Atmega644PA IC unit then processes these signals according the users selected firmware and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabilizes your multi-rotor craft. The KK2.1.5 Multi-Rotor control board also uses signals from your radio systems receiver (Rx) and passes these signals to the Atmega644PA IC via the aileron, elevator, throttle and rudder inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight

• 6050 MPU system based.
• Signal from Receiver: 1520us (5 channels)Signal to ESC: 1520us
• Easy graphical interfacing with receiver.
• In Built firmware.
• Easy to use for beginners.And the Size is : 50.5mm x 50.5mm x 12mm Weight: 21 gram

kk 2.1.5 flight controllerkk 2.1.5 flight controller setupkk 2.1.5 setupkk 2.1.5 manualkk 2.1.5 wiringkk 2.1.5 flight controller

Product Details:

The Robocraze Apm 2.8 Mega Mission Planner allows you to easily plan mission, or upload new firmware with only a few clicks of the mouse, enabling any user to easily get started. With the addition of a Telemetry Kit, you can track your UAV in real time, or even change your mission while your ArduPilot Mega powered UAV is in the air. Free open source autopilot firmware that supports planes, multicopters (tri, quad, hex, oct, etc), traditional helicopters and ground rovers! Simple setup process and firmware loading via a point-and-click utility. No programming required! (But if you do want to fiddle with the code, you can with the easiest embedded programming toolkit available: Arduino) Full mission scripting with point-and-click desktop utilities Can support hundreds of 3D waypoints Two-way telemetry and in-flight command using the powerful MAVLink protocol Choice of free Ground Stations, including the state-of-the-art HK GCS, which includes mission planning, in-air parameter setting, on-board video display, voice synthesis, and full datalogging with replay. Autonomous takeoff, landing and special action commands such as video and camera controls Supports full "hardware-in-the-loop" simulation with Xplane and Flight Gear 4MB of onboard data-logging memory. Missions are automatically datalogged and can be exported to KML Built-in hardware failsafe processor, can return-to-launch on radio loss.

• This is the new APM 2.8 autopilot module, upgraded Version 2.5 2.6
• Out of the V2.52 version of the old 1.0mm 6P SM06B GPS interface, I2C interface to external compass DF13-4P, DF13-5P GPS interface and external compass interface is placed together, with more convenient GPS and external compass
• V2.8 improved the design, use jumper selection, MAG markers found on the board pin plug(Near to GPS connector), jumper cap for a built-in compass, unplug the jumper cap for external compass
• One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000
• The new version of V2.8.0 use Micrel MIC5219-3.3, output capacity reached 500mA

Product Details:

With the development of electric technology, we have a new design of easy compact balance charger for 2~3 series LiPo battery fast charging with wide AC input. A internal 100-240V AC switch power is built in, and the high precision balance circuit can supply larger current up to 850mA series. Double colour LED can display the process of charging (RED: charging; GREEN: full). This charger is compact and light, especially there is separated corresponding balance port for each battery pack.

Product Details:

This is a 450mm size quadcopter frame that is made from plastic and fibreglass. It includes an integrated PDB. This F450 flaming wheel compatible frame is ideal for new users who would like to build their first quadcopter as this is a very affordable and strong frame that can handle crashes. Similarly this frame can be used by more advanced users who would like a simple lightweight platform to try more aggressive stunt flying without the worry of breaking an expensive quadcopter frame.

Additional Information:

• Item Code: TIFQC0035
• Delivery Time: 1-2 working days